Login to the address 192.168 1.1. All ways to enter the settings of a Rostelecom router. To do this, follow the instructions

It is very difficult to understand the process of operation of the router, especially in cases where a port has stopped working or access to the Internet is instantly lost. In this case, the firmware on the equipment will not be up to date. But you have to look for complete information on how to enter the settings of a Rostelecom router on the network in parts, connecting everything together. For this reason, you should review all the instructions in one moment, following the sequence.

Login to Rostelecom settings

In order to enter the main interface of the equipment, which is often used during initial manual setup, you should perform the following steps:

You should check that you entered the authorization data correctly when setting up Wi-Fi, as well as the order in which the cable that goes from the router to the computer is connected.
The “Connected” icon should be displayed, indicating that the router has actually started working.
After opening the web browser, you should enter the address bar 192.168.1.1. An alternative to this action is the new address 192.168.0.1.
Enter admin/admin as login and password. Sometimes the password line is left blank or the combination 1234 is entered.

At this point, the question of how to enter the settings of a Rostelecom router can be considered closed. But when logging in, certain errors may appear, which are most common. The first is that it is impossible to open the login form, the second is that the standard login and password do not allow you to log in.

Regarding the availability of the IP address, here you can try changing the Internet protocol parameters.

Most often, this data is automatically clogged by the network. Otherwise, you should save the existing numbers in a separate file, after which you should switch the protocol to automatic reception for all items. After saving the settings, you should reboot the system and try to log in again.

Another option is to enter the data yourself manually. The order of the process is as follows:

255.0.

When this option does not bring the desired result, in the 1st, 3rd and 4th points you should replace the number “1” with “0”.

Opening ports on the router

No difficulties will arise if you want to open ports on the Rostelecom router. This happens more often when working with torrent programs and numerous game client applications. Initially, you should enter the main menu, where you select the “Advanced settings” - “NAT” section. In the virtual server item, select:

TCP/UDP protocol.
Required port or range of values.
Local IP address of the computer.

When all the information has been saved, the new port will be displayed and will be used. It is worth noting that the laptop system can become an obstacle to the full operation of the ports. Access is checked, and only then work begins.

Finding the IP address of the equipment

Each individual router has its own IP address. To do this, use the documentation for the model. Most often this is presented in the form of a sticker on the back of the device. If you enter the data incorrectly, you will not be able to access the network.

If you need to reset the router parameters, use a special “Reset” button on the case. After pressing, it should be held for 5 seconds. Almost any global problem will thus be eliminated.

There are many reasons that make users think about how to enter the settings of a Rostelecom router. Those wishing to change the basic parameters of the equipment may be interested in both minor nuances and changes in the operation of the equipment, as well as making serious edits and even updating the software.

At the same time, regardless of the user’s motives and the brand of equipment (the modem can be manufactured by Asus, Huawei and other manufacturers), each person may encounter unexpected difficulties that need to be solved. One of the most common difficulties is entering the settings menu. Despite the apparent simplicity of the entire process, not all people manage to cope equally successfully with difficulties that require, first of all, attentiveness and a small amount of knowledge.

How to enter the settings of a Rostelecom router

To replenish your knowledge, you just need to try to apply the theory in practice a couple of times. So in the situation with entering the settings menu in 2019, everything is the same.

In this case, the procedure for entering the modem menu is extremely simple and looks like this:

first of all, you should make sure that the modem is turned on and connected to the computer (for wireless communication there must be a wi-fi connection);
if there are no problems with the connection, you need to open any browser and enter 192.168.1.1 or 192.168.0.1 in the address bar;
after entering this combination, the authorization page will open;
in the tab that opens, you must enter your login and password (depending on the equipment model, but usually admin and admin).

This completes the login process and users are presented with the router interface.

Finding the router's IP address

From the above instructions it is clear that problems for subscribers can arise only in two situations:

when they fail to find the correct IP address;
when you cannot find the correct password.

In each case, users will have to decide whether to search for the information they need on their own or whether it is easier and faster to use the help of specialists.

In the second case, the only thing left to do is contact the support operators and ask how to log into the Rostelecom router. And firstly, you should take a closer look at the modem itself. Often all the necessary data is indicated on the case (on a sticker). If the case is empty, you can look at the box in which the equipment was packed. The last way to get an answer to the question of where to find the login and IP address is to study the instructions that came with the device. If none of the mentioned items contains such important information, all you have to do is call the contact center and ask for advice from specialists.

Resetting the modem

Sometimes equipment owners are faced with a rather unpleasant problem that can confuse many inexperienced users. The problem is that even entering the correct password does not allow you to access the device menu.

The only way to solve this problem is to reset the existing settings to the factory level.

To do this you will need:

find a small reset button on the modem body;
press it;
hold the button pressed for 5 seconds (a little longer is possible).

After this, you should try to re-enter the standard login and password.

It is important to note that this approach is the same for all equipment models, including devices from ASUS and Gron Ont. This technique is effective in solving a large number of difficulties that are not related to equipment failure due to the actions of the provider.

How to open ports on a router

Having figured out how to log into the Rostelecom router, you can move on to the next question. It consists of opening the ports necessary for the operation of the torrent and individual online games.

To improve the quality of communication, you will need:

go into the modem and select the item that offers to open advanced settings;
switch to NAT subkey;
specify the correct connection interface (you must find it in the documentation);
load the virtual servers section and indicate the correct addresses (parameters);
in the protocol field you should select TCP/UDP;
Next you need to specify the appropriate port;
and the last one will be the previously used IP;
after which all that remains is to apply the specified settings and check the functionality of the port.

Usually, after the actions taken, difficulties no longer arise, and if difficulties arise, it is better to consult with the professionals working in the contact center.

How to flash a router yourself

Knowing how to log into a Rostelecom router, you can think about updating the software yourself.

You can do this in two ways:

the first is suitable for modern technology and consists of automatic software updates;
the second requires prior downloading.

The first step is to figure out how to improve access to the World Wide Web by flashing the equipment using the second method.

To do this, users will have to:

go to the official website of the company that produced the equipment and download the required program;
Next you need to go to the modem menu and switch to the already mentioned advanced settings;
select the “system” subsection and find the item related to the update in it;
click “browse” and find the downloaded program;
start the update process and reboot the equipment.

In case of automatic update, the entire procedure remains the same, but users do not have to waste time searching for the firmware.

It is important to note that the computer should not be turned off during the update, as this can lead to serious hardware damage. And then only a repair shop will be able to restore the operation of the modem.

You try to go to the setup menu of a router, modem or optical ONT terminal via http://192.168.1.1 and the “personal account” of the device does not open for you. What to do? Call a specialist and pay money? Take your time and don't get discouraged. Let's try to figure out the problem together and decide how to log into the router?!

I think it's useful to know a little theory first:
192.168.1.1 — this is the IP address (IP) of the network device. By default, the network is usually registered on routers: 192.168.1.0/24. In other words, the local network on the router is configured with the first (lowest) address in the subnet - 1, and clients connected via the local network will use addresses with 2 By 254 . In general, this is a generally accepted rule and is configured this way for the vast majority of network devices - Zyxel Keenetic, Lincsys, Cisco, TP-Link, Upvel, Sagemcom, Asus. There are, of course, exceptions. For example, D-Link and Netgear routers use a different subnet by default - 192.168.0.0/24 and accordingly the IP will be - . But, whatever one may say, the numbers are different, but the meaning is the same - that IP 192.168.1.1, that 192.168.0.1 is the address of a network device on the network. In our case -

How to log into the router

Now let's move on to practice. To go into the settings of a WiFi router or ADSL modem, you must enter the address in the browser: http://192.168.1.1. In this case, you do not need to type the protocol at the beginning - http:// or www - the browser itself will automatically enter the required one.

If you have access to the settings, you will see an authorization form on the device, where you will need to enter your login and password (usually to log into the router via 192.168.1.1 you use: admin / admin):

This means that the local network is configured, the router is accessible and there are no problems with accessing its settings. We will consider the worst case scenario - the browser displays the error “Page is unavailable” or “Unable to access the site”:

Web interface accessibility issues can vary. Let's look at the most common of them:

Instructions on how to log in to 192.168.1.1.

Step 1. Check the activity of the network connection.

Very often, the reason for the router’s inaccessibility is the network cable disconnected from it.

In this case, it is not necessary that someone pulled out the cable intentionally - the connector can simply move a millimeter away from the network card connector and nothing will work. Be sure to check the integrity of the cable - it may be pinched somewhere or damaged by something. Please also note that the LAN cable must be connected to the LAN port of the device and not to the WAN port.

Otherwise, you will not be able to access 192.168.1.1 through the WAN port. This port is used to connect the provider cable. But only!

Step 2: Check the network indicators.

Here I mean the physical connection indicators both on the computer’s network card and on the router itself. What are they? Typically this is a green LED. If the network is active, the indicator lights up or blinks quickly. We take your device in our hands and look at the front panel. When turned on, the Power indicator must be lit - it means that the device is turned on. Then we look at the LAN port indicators - they are usually marked either simply with numbers - 1, 2, 3, 4.

When plugging the patch cord into the LAN port— the indicator with the corresponding port number should light up. If it does not light up, try disconnecting the network patch cord and plugging it into the adjacent connector. If the indicator does not light up there either, try everything one by one. Did not help? Then you have The router is faulty - take it to service.

Step 3: Check your network settings.

At this stage, we need to check the settings of the network adapter - which IP is registered. To get to the network card settings on the Windows XP operating system, click the Start button and select the Network Connections section. In Windows 7 and Windows 8, press the key combination Win+R. The Launch Program window will open. Here you need to type the phrase - control panel.

The Windows Control Panel will open, where you need to find the “Network and Internet” section.

Click on it with the left mouse button. The following window will open:

Now, to open the router’s personal account via 192.168.1.1, click on the “Network and Sharing Center” link:

Select the menu item “ Properties" . The Local Area Connections properties window will open:

Select “Internet Protocol Version 4 (TCP/IPv4)” and double-click on it with the left mouse button. In most cases, IP settings are set to automatic mode:

This is how the system was initially configured. This is done in order to facilitate the connection of the computer to the network. Thanks to this, if there is a DHCP server on the network, Windows will receive an IP address, mask, gateway address and DNS from it.
But what if there is no DHCP server on the network, or it is disabled in the configuration? In this case, logging in via 192.168.1.1 to your personal account in automatic settings will not be available, since the IP will be picked up from a special Microsoft subnet - 169.x.x.x. It goes without saying that with such an address you will not have access to the WiFi router address. Therefore, to enter its configurator, you need to register the IP manually - check the “Use the following IP address” checkbox and enter the addresses as in the picture:

That is, the following should be written:
IP address - 192.168.1.2
Mask - 255.255.255.0
Gateway - 192.168.1.1
Preferred DNS server - 192.168.1.1
Alternative DNS server - 8.8.8.8
Registered, click the “OK” button for the changes to take effect. We launch the browser again and try to go into the router settings at 192.168.1.1. The router’s personal account is still inaccessible?! Well, let's move on.

Step 4. Check the Web browser.

In the Control Panel, select the “Network and Internet” section :

Now you need to select “Internet Options” and open the “Connections” tab. Click the “Network Settings” button:

No Proxy servers should be registered.

Keep in mind that a web browser is also a program and may not work entirely correctly. Therefore, be sure to install another browser - Firefox, Opera or Chrome - and try to log into the router via 192.168.1.1 (Zyxel Keenetic, TP-Link, ASUS, etc.).

Step 5. The node can be blocked by the Security System.

It may happen that your modem or router becomes unavailable locally due to incorrect configuration of the Windows Firewall or another firewall you have installed. To eliminate this we do this:
We completely disable (by stopping the service) the security system you have installed - antivirus, firewall, etc.
Also, to exclude all options, we try to disable the standard Windows Firewall. It can also block IP 192.168.1.1 or an entire subnet. Go to the Control Panel, select the “Windows Firewall” section and completely deactivate the packet filter by clicking on the “Turn off” value.

On Windows 7 and Windows 10 Toolbars We look for the “Security System” -> “Windows Firewall” section and select the “Turn Windows Firewall on or off” menu item.

We disable it completely for private and public networks.

Again we check access via 192.168.1.1 to the personal account of the modem or router.

If none of the above helped you, then only the following scenarios remain:

1 option- The IP address on the router has been changed. That is, it is not 192.168.1.1 that is used, but another IP - 192.168.0.1, 10.90.90.90, etc. In this case, all that remains is to reset the device configuration parameters using the “Reset” button on the back panel of the device and configure it again.

Option 2- viruses and malware. Nowadays there are a lot of different infections circulating on the Internet, including viruses for routers that change some of their settings, after which logging into the device’s web interface also becomes quite problematic. Start by checking your computer or laptop for viruses.

Option 3— check if you can access 192.168.1.1 from a phone or tablet by connecting to a WiFi network. The password for connecting to a wireless network is often written on a sticker glued to the bottom of the device. If not, then, as an option, you can try using the WPS function. In this case, the PIN code will also be written on the sticker.

Option 4- Hardware failure of your modem or router. In this case, the only way out is to take it to a service center.

Video tutorial:

In this case, only 2 options are possible:
1 - Reset the settings with the “Reset” button, as described above, after which access to the modem settings should be possible without problems. But please note that after resetting the settings, the router will be pristine and will have to be completely configured from scratch.
2 - Look for the person who originally set up your device and ask for the password. If this was done by a master installer from the provider, then perhaps he installs the same thing on all devices. If the parameter settings were made by someone else, then he is unlikely to remember and will still have to use “Reset”.

The most popular devices using the address 192.168.1.1:

Zyxel equipment.

ADSL modems:

OMNI ADSL LAN EE, OMNI ADSL LAN EE, OMNI ADSL WLAN EE, P-660H EE, P-660HT EE, P-660HTW EE, P-660HW EE, P-660R EE, P-660RT EE, P-660RU EE, P-662H EE, P-662HW EE, P-741, P-791R v2, P-792H EE, P-792H v2, P-793H, P-793H v2, P-794M, P-841, P-844 EE , P-870H-51A V2, P-870HW-51, P-870HW-51A V2,
P-870MH-C1, P-871 EE, P-871M, P-872H, P-872HA, P660HN EE, P660HN LITE EE, P660HT2 EE, P660HT3 EE, P660HTN EE, P660HT2 EE, P660RT2 EE, P660RT3 EE, P660RT3 EE, P660RT3 EE, P660RT3 EE, P660RT3 EE, P660RT3E. P660ru2 ee , P660RU3EE

WiFi routers:

BG318S EE, NBG334W EE, NBG460N EE, P-330W EE, P-334 EE.Keenetic, Keenetic 4G, Keenetic 4G II, Keenetic Giga, Keenetic Giga II, Keenetic II, Keenetic Lite, Keenetic Lite II, Keenetic Omni, Keenetic Start , Keenetic Ultra.Keenetic 4G II, Keenetic Giga II, Keenetic II, Keenetic Lite II, Keenetic Omni, Keenetic Start, Keenetic Viva, Keenetic Extra, Keenetic Extra 2, Keenetic DSL.

(Second generation kineticists have the hostname my.keenetic.net)

D-Link equipment:

DSL-2640U B1A T3A, DSL-2640U BRU C, DSL-2640U BRU C2, DSL-2640U BRU CB, DSL-2640U BRU D, DSL-2640U RA U1A, DSL-2740U BRU C2, DSL-2750U B1A T2A

Tp-Link equipment

The configuration interface for devices from this manufacturer looks like this:

ADSL modems:

TD-W8901N, TD-W8950ND, TD-W8951NB, TD-W8951ND, TD-W8960N, TD-W8961NB, TD-W8961ND, TD-W8968, TD-W8970

Wi-Fi routers:

TL-WA701ND, TL-WA730RE, TL-WA750RE, TL-WN7200ND, TL-WN721N, TL-WN721NC, TL-WN722N, TL-WN722NC, TL-WN723N, TL-WN725N, TL-WN727N, TL-WN751N, TL- WN751ND, TL-WN781ND, TL-WR702N, TL-WR720N, TL-WR740N, TL-WR741ND, TL-WR743ND, TL-WA830RE, TL-WA850RE, TL-WA901ND, TL-WN8200ND, TL-WN821N, TL-WN821NC, TL-WN822N, TL-WN823N, TL-WN851ND, TL-WN881ND, TL-WN951N, TL-WR1042ND, TL-WR1043ND, TL-WR841HP, TL-WR841N, TL-WR841ND, TL-WR842ND, TL-WR940N, TL- WR941ND, TL-WA5210G, TL-WA7510N, TL-WR743ND, TL-WR843ND, TL-WA5210G, TL-WN310G, Acher C2, Acher C7, Acher C9, Acher C20, Acher C50.

Domain names are also used: tplinklogin.net, tplinkwifi.net, tplinkmodem.net.

Asus equipment

Web interface of older routers:

ADSL modems:

D6300, D6200, DGND3700, DGND3300v2, JDGN1000

Netgear routers:

R6300, 6200, WNDR4700, WNDR4500, WNDR4500, WNDR4300, WNDR4000, WNDR3800, WNDRMACv2, WNR3500L, WNR3500Lv2, JNR321, WNR2200, JWNR2000, JWNR2000v2, WNR1000 v2, JNR1010, WNR612v3, WNR612v2.

Rostelecom routers are configured in the same way as most similar devices. The sequence of actions required for connection, authorization and changing parameters will be discussed in detail below.

Let's start with the basics. To enter the router settings, you need to connect it to the power supply and wait until the equipment boots up. The next important point is the connection method. You can access the router control panel in two ways - via cable or WI-FI. In both cases, the possibilities for changing the configuration are almost the same, with the exception that you cannot reflash the router via WI-FI.

In the case of a wireless connection, you first need to find a newly created WI-FI network, which by default has a name similar to the router model; entering a password will not be required if no one has assigned it before.

When pairing a PC and a router via cable, you must insert one of the connectors into the network card connector on the computer, and the other into the LAN port of the router.

Further actions are no different both in the case of configuration via wire and without it.

We launch the program to view Internet pages (to enter the settings of the Rostelecom router, any browser, for example, Opera, will do). It doesn’t matter if you log in from a smartphone or PC.
In the address bar, enter the IP of the router, for example, 192.168.1.1 or 192.168.0.1.
If the address is correct, an authorization form will appear in which we enter the username and password to log into the Rostelecom router (usually admin/admin).

In most cases, the above values will be correct and once entered, the device control panel status page will open. If the parameters were changed for some reason, then when logging into the admin panel of the router, a number of problems may arise, the solution to which is described below.

How to find out the IP address of a router

One of the most common login errors is when the page not found message is displayed at the address specified in the browser line. A common reason for this message to appear is an incorrectly entered IP. The easiest way to recognize it is by examining the sticker on the bottom panel of the device; the password and login for logging into the router are also indicated there. If for some reason the sticker is missing or it is impossible to make out what is written on it, the address is written in the operating instructions, as well as in a copy of the Rostelecom agreement held by the subscriber.

There are situations when none of the above exists. In this case, you should contact the provider's technical support. Over the phone, a company employee will tell you the sequence of actions necessary to find out the address of the Rostelecom router, its login and password.

Common causes of control panel login errors and how to fix them

If you start the command line (key combination Win + R, in the field that opens, write cmd and press enter) and type ipconfig in it, among other things, there will be an item - the main gateway. The numerical value opposite it is the address of the router to which the PC is directly connected.

For Windows devices, a connection error may be displayed due to the lack of a network card driver. In this situation, the connection icon in the notification panel is crossed out with a red cross, and when you hover the mouse cursor over it, a message is displayed indicating that the network cable is not connected. The problem can be solved by installing the driver (if this is a temporary glitch, just restart the PC).

Internet Protocol version 4 settings should be set to automatically obtain the IP address and DNS server addresses. This parameter is checked in the Network Control Center -> change adapter parameters -> right-click on the cable connection -> properties -> right-click on the IPv4 protocol -> properties. In the window that opens, you need to set the switches to automatically obtain addresses.

Resetting the router to default settings

If you still cannot log into the Rostelecom router, you need to reset its configuration to its factory state. This procedure is quite simple, but the process may vary depending on the specific model. Most devices have a reset button - Reset, WPS/Reset or the like. All you need to do is press and hold the button for 10-15 seconds, after which the device will reboot with default settings.

On some modifications, this key is hidden and can only be pressed with a thin, sharp object. The principle is the same - hold it for 15 seconds and wait until it reboots. It is important that you do not turn off the power during the reset process.

After successfully installing the factory settings, the IP address of the Rostelecom router will correspond to that indicated on the label below or in the operating instructions. How to log into the router’s web interface was described above. Simply enter the address into your browser and then provide your authorization details.

Firmware for Rostelecom router to the latest version

The procedure should be performed only when pairing a PC and a Rostelecom router via cable. The sequence of actions is as follows:

Download the file with the latest firmware version from the manufacturer’s official website (on some models this is not necessary, the file will be downloaded and installed during the update through the admin panel interface).
Let's go to router management.
We are looking for the system tools tab or something similar.
Go to the software update subsection.
On the page that opens, you will be asked to specify the previously downloaded file, select it and click the “Update” button.

The system will install the downloaded file, reboot, after which the Rostelecom device will operate under the latest firmware version.

The more people use broadband Internet access, the more often the question arises - how to access the Wi-Fi router settings?! Many people even know that IP is used to enter the router settings 192.168.1.1 , or less often - . And yet, with access to the web configurator, some incomprehensible stories constantly arise, forcing the user to surf the Internet in search of an answer - how to log in to 192.168.1.1 to configure the router. This instruction will fully answer all your questions and will help you understand all the basic intricacies associated with accessing the configuration parameters of a wireless router.

What we're going to talk? To begin with, I will conduct a small educational program and tell you briefly what these addresses 192.168.0.1 and 192.168.1.1 are, why they are needed on the home network, where they need to be entered to go to the page with the router settings and what to do if this can't do it?!

Most often, such questions are of interest to those who have just connected to the Internet, bought a Wi-Fi router for this, and then don’t know what to do with all this stuff! The way modern network devices are designed is that before you put it on the network, you need to change the basic configuration parameters to those recommended by the provider to which you are connected. You will also have to open the router settings if the Internet stops working due to the settings being lost, or when you need to change the WiFi password or some other options. Moreover, no matter what router you use - Asus, Zyxel Keenetic, Tp-Link, D-Link, NetGear, Trendnet, Tenda, Linksys or something else - the process of logging into the router’s web interface via IP address 192.168.1.1 (or any other) is almost the same everywhere and is no different!

IP 192.168.1.1 - what is this address and how to use it

Any modern Internet access device, be it an ADSL modem, WiFi router or xPON optical terminal, is a whole mini-computer! It has its own processor and RAM, and is controlled by a special operating system. Therefore, you should not be surprised by such an abundance of various settings and functions that modern routers are endowed with. Two networks are usually connected to this mini-computer:

WAN or Wide Area Network- This is an external network that comes with the provider's cable.
LAN or Local Area Network- this is your home network, which will include a computer, laptop, phones, tablets and Smart TV.

So 192.168.1.1 is the IP address of the router on the local network, using which you can enter its settings. The same IP is the gateway for the home network.

Recently, manufacturers have begun to assign domain names on the local network to ordinary home Wi-Fi routers. The most striking examples:

Asus - asusrouter.com TP-Link - tpinklogin.net, tplinkwifi.net or tplinkmodem.net Zyxel Keenetic - my.keenetic.net NetGear - routerlogin.net Rostelecom routers - http://rt

That is, in the address bar of your web browser, instead of the IP address 192.168.1.1, you need to enter a symbolic name and press the “Enter” button.

How to find out the IP address of a WiFi router

As I said above, to organize a home network and access management, each router has its own local IP address, through which it will be accessible to all clients. It will also be indicated as a gateway for all gadgets connected to it. How to find out the router address? Yes, very simple. We take it in our hands and turn it over. As an example, I’ll show you a sticker on the Netis DL4320 modem:

On the back of the case there will be a sticker on which all the basic information about the network device is written - manufacturer, model, serial number. Also, in a separate area, the IP address of the router will be registered - 192.168.1.1, 192.168.0.1 or some other. It is this set of numbers that will need to be entered in the address bar of the browser.

If instead of IP a symbolic address is registered, then you will have to enter it. Example - TP-Link TL-MR4320 WiFi router:

By the way, the login and password for logging into the router via 192.168.1.1 are written there. Typically this is the username − admin and password - admin.

If there is suddenly no sticker on the device, then use the instructions from the manufacturer.

How to enter 192.168.1.1 into the router settings

Let's take a step-by-step look at how to properly connect and log into the router settings via 192.168.1.1 for beginners!

Step 1. We start with the fact that you first need to correctly connect your computer or laptop to it, using which we will further configure the router:

It is best to do this through the supplied LAN cable. You can see the connection diagram in the figure. That is, we connect one end of it to the network card of a PC or laptop, and plug the other end into the LAN port on the router. In general, you can log in to 192.168.1.1 via WiFi, but to do this you either need to know the password for its Wi-Fi, or be able to click on . on the router, then connect within two minutes.

As soon as you connect to a network device, the Windows operating system can automatically set the connection status to “Restricted” or “No Internet access”. There is no need to be scared - this is normal. Since the device is not configured, it does not have access to the global web! This does not affect access to the web configurator!

Step 2. Launch the web browser. You can use absolutely any browser, but I would still recommend using either Google Chrome or Microsoft Edge. Alternatively, Opera will do. But with Firefox, sometimes there are problems with the layout and operation of interactive elements,

Step 3. In the address bar where you usually write the website address, type the router’s IP address - http://192.168.1.1(or http://192.168.0.1 depending on what is indicated on its sticker). Press the “Enter” button. If everything is configured correctly and there are no problems, a window should appear with fields for entering your login and password, as in the picture above. Enter your login information to open the web interface. Typically used to log in to 192.168.1.1, login admin, password admin. Some D-Link models may not prompt you for a password. On Tenda routers, you may not be prompted for a username and password at all!