Self-configuration of the TP Link router for the Rostelecom provider. How to connect an ADSL modem to a Wi-Fi router using a network cable? Connection diagram and setup Open tp link modem settings


In order to get to the router’s web interface, you need to open your Internet browser and type 192. 168.1.1 in the address bar, Username - admin , Password - admin(provided that the router has factory settings and its IP has not changed).

Setting up a PPPoE connection

The main menu of the modem will open on the section Status; . Go to the section Interface Setup; .

In the window that opens, select a subsection Internet; . We set the settings as shown in the screenshot: - Virtual Circuit value for home networks: PVC0.

  • Status is marked Activated;
  • VPI and VCI values for home networks: VPI = 2, VCI = 35; ( !!!Check these values ​​with your provider!!!)
  • ATM QoS select UBR;
  • ISP mark Dynamic IP Address;
  • Encapsulation select 1483 Bridged IP LLC;
  • Bridge Interface is marked Deactivated;
  • NAT select Enable;
  • Default Route check Yes;
  • TCP MTU Option is left at 1500;
  • for Dynamic Route: RIP2-B, select None for Direction;
  • Multicast select Disabled;
  • MAC Spoofing is marked as Disabled. After all parameters have been entered, press the SAVE button;

Setting up Wi-Fi on the router

After turning on the device, in the list of available wireless connections you will be able to find a network similar to TP-Link_XXXXXX, with free access by default. To restrict access to a wireless network connection, go to the tab Interface Setup > Wireless where we are interested in the following settings items: Access Point(Enable/disable access point). SSID(network identifier), for this model the default SSID is TP-LINK_E2C8D6, but you can set your own identifier. Broadcast SSID(network identifier broadcast), if this parameter is set to No, then you can connect to the network only if you know its SSID (hide the network name if you want to enhance security). Use QSS(Quick Secure Setup - Quick security setup). By activating QSS, you can connect to a secure wireless network with one click of a button on the router, or using the 8-digit PIN code of the transmitter. In this example, QSS is disabled. Authentication Type(encryption type), select WPA2-PSK if you want to ensure the maximum level of security (some devices do not support this algorithm, if you have problems connecting any devices, try another type of encryption such as WPA-PSK or WEP). Pre-Shared Key(Security key when connecting to the network). The key must be at least 8 characters long.

Safety

Be sure to change the default password "admin" to access the Web interface. Go to the page Administration in the tab Maintenance and set your password.

By default, access to the Web interface is possible both from the local network and from an external network (from the Internet). You can block access to settings from outside on the page Access Control Setup, by creating an appropriate rule. In this example, a rule is activated that allows access to applications only from the local network LAN.

TP-Link modems are in high demand. The popularity of the device is explained by its good performance and reasonable cost. This is one of the best price-quality ratios. The device also allows you to create a home local network to access all files on different devices. There is nothing difficult about how to set up a modem if you know what to do. Below we will discuss how to correctly perform the manipulation using the TD W8961 ND as an example.

For a video review and instructions for setting up the modem, see the following video:

Appearance

The TP-Link TD W8961 ND model can be called a router with a built-in ADSL modem. It is a trapezoidal device with rounded corners. On the surface of the case there is an abstract pattern with holes for ventilation of the mechanism. This stylish design of the device will fit into any room.

On the back panel of the device there are 4 LAN ports, LINE RJ 11, a socket for connecting the power cord, a button for turning on and rebooting. There are light indicators on the top cover.

The device has the following dimensions: 195*130*35 mm, antenna length – 200 mm. On the bottom panel of the case there are grooves for mounting the device on the wall.

Specifications


The device has the following capabilities:

  • data transfer speed – up to 300 Mbit/sec;
  • frequency range – 2.4-2.4835 GHz;
  • additional functions – DDNS, virtual server, VPN traffic passthrough;
  • the temperature at which the router operates normally is 0-40 0 C;
  • relative air humidity for operation of the device is 10-90% without condensation.

Installation and connection

In order for the TP-Link modem to work without interruption, it must be installed correctly. It is recommended to place the device in a central room so that the signal reaches all rooms of the apartment or house. In addition, the device is placed away from a computer or laptop, as well as household appliances, which include microwave ovens and other appliances.

In order for the TP-Link modem to be used for its intended purpose, it must be connected correctly.


To connect the router, perform the following steps:

  • the cable for connecting the Internet is installed in the WAN/ADSL socket;
  • the power cable is inserted into the appropriate connector, and the plug is connected to the outlet;
  • press the power button to activate the device;
  • One end of the cable is inserted into the LAN port, and the other end into the corresponding connector on the computer.

After this, the TD W8961 ND device will be ready for use.

Settings

To configure the TP-Link modem, you need to open a browser on your computer and enter the IP address of the router into the search bar. It is written on the bottom panel of the device.


When the address is entered, click on the “Search” button. After that, they go to the first site, bypassing advertising. Next, enter your login and password into the appropriate windows (admin/admin by default).


Let's talk about how to configure an ADSL modem from TP Link using the example of the TD-W8961ND model described above.

A router is used to connect to the Internet via a telephone cable. You will need an agreement with the provider!

Internet connection


  1. We go to the web interface of the router.
  2. In the “Interface Setup” column, select “Internet”.
  3. You will see the inscription “Virtual Circuit”, where you need to select the PVC0 channel.
  4. In paragraphs VPI and VCI we enter the data from the contract.
  5. In the "ATM QoS" column you need "UBR".
  6. In the “Encapsulation” section, set the connection type and specify the login and password from the provider.
  7. To activate the connection, check “Always On”.
  8. Apply the settings.

Setting up WI-FI


Now we need to set up a wireless connection. Let's also write it down point by point:

  1. We need a “Wireless” section in the interface.
  2. In the “Channel” window we look for our region.
  3. If desired (and according to the recommendations of those in the know), we change the network name (SSID).
  4. We select the WPA2 security protocol with AES encryption.
  5. In the “Encryption” section we need AES.
  6. Now you need to come up with a security key (password for your network). We write it in the “Pre-Shared Key” window and save.

Change Password

To prevent other users from connecting to the router, it is recommended to change the password. You can do this as follows:

  • enter the router settings;
  • go to the “Maintenance” subsection;
  • select the “Administration” tab;
  • enter a new password in the appropriate column and enter the same password again in the line below for confirmation;
  • save the changes made.

Reset

Sometimes routers stop distributing WI-FI. In this case, various manipulations are performed to solve the problem, and sometimes it is necessary to reset the settings to factory settings. To do this, press the power button and hold it for 15-20 seconds.

You can also reset the settings as follows:

  • enter the device settings and go to the “Backup & Restore” subsection;
  • Click on the “Restore” button.

After this, all settings are reset to factory settings.

Setting up a TP-Link router

Well, since we're talking about TP-Link, let's give brief instructions on setting up these routers, in case it comes in handy!

A video tutorial on setting up a router from TP-Link is in the following video:

Internet connection

Proceed as follows:

  • log in to the “Network” section;
  • go to the “WAN” sub-item;
  • select the line “PPPoE”;
  • enter the network login and password in the appropriate windows - such data is indicated in the agreement with the provider;
  • place an icon opposite the inscription: “Connect Automatically”;
  • click on the “Save” button;
  • go to the “MAC Clone” subsection, which is located below the “Network” tab;
  • click on the “Clone MAC Address” button;
  • click on the “Save” button.

Setting up WI-FI

To access the Internet via a WI-FI network, perform the following steps:

  • log in to the “Wireless” section;
  • go to the “Wireless Settings” sub-item;
  • enter the network name in the appropriate column;
  • enter the region where you are located, do not change the other settings;
  • click on the “Save” button.

Modems and routers with a built-in TP-Link ADSL modem allow you to access the Internet and view files on different devices on the same home network. In order for the device to function without interruption, it must be configured correctly. Even users who do not have perfect knowledge of the Internet and wireless communications will not have any problems with the procedure. The main thing is to follow the instructions given above.

The TP-Link TD-W8151N ADSL router is designed to create a home or office wireless network.

You can also use this model to wire a single computer. This article describes how to configure this device.

Connection

Before starting setup, the router must be connected to the network. This router is designed for connecting thin telephone cables - ADSL. If the Internet from the Rostelecom provider comes to you via an Ethernet cable (eight- or four-wire twisted pair), you need to purchase another device.

In the yellow LAN port, plug in the connector of the patch cord coming from your personal computer. You can also connect to the router via Wi-Fi. To configure router settings, you can use any device with a browser installed.

Automatic setup

The router usually comes with a special DVD with a utility for quickly setting up the network. Connect your computer to the device and insert the disc into the DVD drive. In the launched program, you can select the interface language, as well as the model of your router - TP-Link TD-W8151N.

Then simply follow the instructions of the application. It is recommended to prepare in advance your copy of the service agreement with Rostelecom, since it contains the data necessary for setup (password and login for a PPPoE connection, or addresses for Static IP). It will help you find out your Internet login and password.

Authorization in the TP-Link interface

To access the TD-W8151N settings, users must log into a special interface through their web browser:

  • Click on the network connection icon in the Windows tray (to the left of the clock and date).
  • Click on the “Control Center...” hyperlink.
  • Go to the section called "Adapter Settings" using the tab in the navigation menu.
  • Double-click the icon for your current local connection.
  • Click on the “Details” button.

  • In the window that opens, find the “Gateway” option. This is the IP address of your TP-Link TD-W8151N. Copy it.
  • Launch any browser on a computer or laptop connected to the router’s network.
  • Paste the previously copied address into the address bar and press Enter. You can skip steps 1-6 if there is a sticker on the back cover of your router with all the information necessary to log in.

  • In the authorization window that opens, Rostelecom subscribers must specify a password and login to gain access to the router configuration menu. They can also be found on the label on the device body. Typically, you must enter “admin” in both fields.

After the above steps, you will be redirected to the main interface page to configure the TD-W8151N modem.

Internet connection configurations

First of all, you will need to set up a connection with Rostelecom to gain access to the Internet:

  • In the navigation menu located at the top of the page, select the “Interface Setup” tab.
  • Open the very first subsection – “Internet”.
  • You need to specify the values ​​for the VPI and VCI parameters, which depend on the region in which you live. For example, for Moscow these will be the numbers “0” and “35”, respectively. For other localities, these settings should be clarified by calling the subscriber technical support operator.


  • If you specified PPPoE, enter your username and password assigned to you by your provider. For a static address, you must specify the IP, Subnet Mask, Gateway, and DNS server. If you have chosen dynamic addressing, you do not need to specify any additional parameters.
  • Click on the “Save” button at the bottom of the page.

If you did everything correctly, the router will connect to Rostelecom servers, and you will have Internet access. If the router still does not work, you can consult technical support.

Wi-Fi setup

After the basic settings, you can set the wireless network parameters for more convenient use:

  • Go to the “LAN” section in the top menu.
  • If you want the router to automatically distribute addresses to devices connected to the network, set the “DHCP” parameter to “Enabled”. If it is more convenient for you to enter addresses manually each time, disable this option (“Disabled”).

  • Click "Save".
  • Now open the “Wireless” tab.
  • Opposite “Access Point”, check the “Enabled” checkbox to enable data transfer via Wi-Fi.

  • Select “Russia” from the “Channel” drop-down list.
  • A little lower, find the “SSID” parameter. Here you need to enter the name of your access point, for example, “My_Wi-Fi_Router”.
  • In the Authentication Type category, select WPA2-PSK.

  • It is better to choose a combined encryption type - “TKIP/AES”.
  • In the text field opposite “Pre-shared key”, write the password for your network.
  • Save your changes.

Completion

For security reasons, it is recommended to change the password to access the router configuration menu. To do this, go to the “Maintenance” section in the “Administration” tab. Here you need to enter the new password twice. You should not duplicate the key for the Wi-Fi network, it may be unsafe.

After changing all settings, the device must be rebooted. To do this, open the “SysRestart” tab. Check the box next to “Current settings” and click the “Restart” button.

Hello dear friends. Nowadays, unlimited Internet will not surprise anyone, as well as its high speed. People are massively buying tablets, laptops and smartphones that have a built-in Wi-Fi module that allows them to use wireless Internet throughout the home. And some people just want to get rid of wires throughout the apartment. In both cases, Wi-Fi routers came to the rescue, making it easy to distribute the Internet throughout the house. We'll talk about this further.

Of course, I decided a little late to get a Wi-Fi router. So again, an article from my own experience. I will write about that today how to connect and configure Wi-Fi router TP-Link TL-WR841N (this is the router I bought for myself). Also set a password for the Wi-Fi network so that the neighbors don’t steal the Internet :).

Before I move on to writing the instructions, I’ll draw your attention to a question that probably worries a lot of people who have thought about installing a Wi-Fi router. This is about the harmfulness of Wi-Fi, I wrote an article about it, you can read it. And one more thing, you ask (what is there to ask, if you are reading this article, you have probably already bought a router) why did I choose the TP-Link TL-WR841N router? According to my observations, this is the best option for this price; I paid 300 UAH for it. (1200 rubles). This is not an expensive router that can provide a full-fledged Wi-Fi network for the home.

I’ve already written a lot of unnecessary text, but I only promised instructions with pictures

1. You brought the router home or to the office, it doesn’t matter, we open the box and find a lot of pieces of paper there, a disk with instructions and a wizard for setting up the router. Also included, of course, is the router itself, if not, then you were deceived :), a network cable to connect it to the computer and a power supply, that’s all.

That's all, our router is connected. Let's now move on to the setup.

Setting up the TP-Link TL-WR841N router

Before you start setting up, I recommend doing .

To configure the router, open any browser and write 192.168.0.1 in the address bar, usually 192.168.1.1 goes through, but I was able to access the settings only through 192.168.0.1. Only after configuring the firmware update do I get access to the settings via 192.168.1.1.

A window will appear in which you need to enter your login and password to access the router settings. By default, the login is admin and the password is admin.

If the router does not accept the password and login by default, then see the article for possible solutions to this problem.

We get to the settings page.

Let's first update the firmware on our TP-Link TL-WR841N. To do this, you first need to download it from the site tp-linkru.com. We find it for our model and download the latest version. Unzip the firmware file to your computer and return to configuration.

Go to the “System Tools” menu and select “Firmware Upgrade”. Then click “Browse”, select the file we downloaded and click “Upgrade”. We are waiting for the router to update the firmware and reboot.

More detailed instructions for updating the firmware on the router -

Let's continue with the setup. Let's change the login and password to enter the router settings. Go to the “System Tools” tab, and then “Password”. fill in all fields and click “Save”.

Go to “Network” and “WAN”. Here you need to select the network type. If you don’t know what to install, call and ask your provider. You can also look at a detailed article on setting up a router to work with your provider -

Setting up a Wi-Fi network on TP-Link TL-WR841N

Go to the “Wireless” tab and configure the following parameters. In the “Wireless Network Name” field, enter the name of your Wi-Fi network. Below you can select the region where you live.

Don’t forget to click “Save” and go to the “Wireless Security” tab. This is the most important page, where we will configure the security settings of our Wi-Fi network.

For more information about setting a password for a wireless network, see

We set everything up as I have in the screenshot above. In the PSK Password field, create and enter a password that will be used to connect to your Wi-Fi network.

We save our settings with the “Save” button. The setup is complete, let's now reboot our router. To do this, go to the “System Tools” tab, and then “Reboot”. Click on the “Reboot” button and confirm the reboot.

That's all, we have just installed and configured a Wi-Fi router. As you can see, there is nothing complicated here and you can do without calling a specialist. If you have any questions, ask them in the comments. Good luck friends!

The review looks at how to configure a router equipped with a built-in ADSL modem. For example, we use a multifunctional TP-Link router model TD W8901G, which allows you to quickly set up a connection with a provider and a wireless network.

The operating principle of a WiFi router equipped with an ADSL module allows you to create a connection “via telephone wire” without occupying the line. Included with an ADSL modem or multifunctional router is another device called a “splitter.” The connection diagram is shown in the figure.

First, a connection with the provider is configured, then you can turn on the wireless network. The Internet will become available to all its subscribers automatically.

To set up a Wi-Fi router, you need to connect one computer to it via a network cable (the patch cord that comes with the kit). Let's take a closer look at the setting.

Setting up the router

Connection, login to GUI

Before setting up, you need to connect a telephone cable to the device, as well as a patch cord that is connected to the computer’s network card. The network card on the computer must be configured as follows (“properties” of the wired connection):

That is, the computer will receive an IP address and DNS addresses from the router automatically. Lastly, you need to turn on the router's power supply.

After waiting 2-3 minutes for the device to boot, on the computer you need to launch the browser and go to the address 192.168.1.1:

The “admin” pair is suitable for TP-Link as a login and password. In the next step, a tab will appear in the browser window:

Device setup wizard

Here, you need to click “Exit”.

Connection setup

The instructions for setting up the router provide all connection options, even when the device operates in “bridge” mode, typical of inexpensive ADSL modems. Still, let’s consider the operation of the device in “router” mode. We need to connect to a provider that uses the “PPPoE” protocol. If you use a static IP, you need to select “PPPoE encapsulation” in the settings; if you use a dynamic IP, do the same. Now let's look at an example setup.

The router menu at the top contains a list of tabs, and the line below it is a list of bookmarks. Go to the “Interface Setup” tab to the “Internet” tab:

One example of configuration is shown when the IP address is not fixed (that is, dynamically obtained). In any case, you need to select the type of encapsulation “PPPoE”, then you need to come up with a name for the service, and fill in the fields with the subscriber’s name/password. Most providers use "LLC PPPoE", as shown in the example (but another variant of "PPPoE" - "VC-Mux" - is also possible).

If you want the router to automatically connect (even in the event of a short-term connection break), then you need to select “Connection” – “Always”. We said that we are setting up a connection with a dynamic IP address, and leave the “Get IP Address” switch in “Dynamic”. A router without access to the Internet is not endowed with any IP address at all, which it can obtain after creating a connection.

Finally, if you plan to watch IP-TV, select “Enabled” in the “Multicast” line. You can also change the MAC address, for which “MAC Spooling” is switched to “Enabled” and the value field is filled in (but it may be easier to inform the provider about the MAC address change).

Finally, let's look at the hard part. If the provider does not use “ATM”, the TD W8901G router configuration allows you to disable this option by setting “Status” to “Deactivated”. Otherwise, you will have to set the VPI and VCI values, which you also need to find out from the provider.

  1. VCI=33 VPI=0, with IPTV VCI=34 VPI=1.
  2. VCI=33 VPI=0, with IPTV VCI=32 VPI=0.
  3. VCI=32 VPI=0, with IPTV VCI=34 VPI=1.

Three different providers use “slightly” different values, but guessing is useless, you need to know for sure. After completing all the settings, just click “Save” and the connection will be automatically created. You can verify this by opening the “Status” -> “Device Info” tab.

You can often come across the question: “Help me configure the router, all parameters are set correctly, the connection is not created.” It is possible, and most likely, that the provider binds to the MAC address, but this fact was not reflected in any way in the router settings.

Enabling the wireless network

To configure a wireless network, go to the “Interface setup” -> “Wireless” tab:

Setting up a WiFi router called “Access Point” - allows you to enable or disable the wireless network transmitter. It's on now. Next, the wireless network is configured as follows:

  1. Channel: list of channels - depends on the region. Number (1-13) – set in the list (leave “Auto”).
  2. Mode: leave “mixed” b+g.
  3. The “Broadcast SSID” switch allows you to “hide” the network name (“Yes” means do not hide).
  4. The SSID field must contain the name of the wireless network.

Once you have completed these settings, click “Save”. In less than a minute, the wireless network will appear. Her name is the one that was set by the user. Encryption is not used.

The TP Link TD W8901G router, of course, allows you to enable encryption. To do this, in the “Authentication type” list you need to select the encryption type:

Additionally

IP-TV

An example of setting up a LAN that allows viewing IP-TV is given. Digital television will be broadcast, among other things, over a wireless network. For the parameters to take effect, you must click “Save”.

All this is true if, when setting up the connection (“Interface Setup” -> “Internet”), the “Multicast” line is set to “Enabled”. Happy setup!

A multifunctional network device, including a router and an ADSL modem, must have a certain set of capabilities. In the absence of some of them, the acquisition is useless. The “top routers” usually look at which device is faster than others (easier to set up, more reliable, etc.). But an ADSL modem that does not have the necessary options in its settings (for example, the choice between “VC-Mux” and “LLC” modes) may be 100% useless. When choosing, you should carefully read the specifications, comparing them with what is required for a given provider.

Objectively, it may be like this: the router organizes a “high-speed” wireless network, data exchange between internal subscribers goes very quickly, but the Internet through the router slows down, and for a completely different reason. The total transmission speed between the router's network subscriber and the provider depends on some features in the router's implementation. For example, in the speed of exchange (routing) between the home network and the built-in modem.

Although, with speeds of a few megabits, the latter is still a rarity. The “slowest” routers we know of can slow down connections when there are about 100 of them, reducing the total speed to 10 Mbps. Most providers do not provide even 8 megabits. So, it all depends on the quality of the ADSL modem itself and the wires used by the provider.

Question answer

Question: A router with ADSL can operate in bridge mode. What does it mean?

In “bridge” mode, a device with an ADSL module does not receive an IP, does not tell the provider a password, and does not initiate a connection. That is, it is an “adapter” between the LAN network interface and the telephone cord. With this setup, the “bridge” must “know” only 2 parameters: VPI and VCI.

Connection diagram for the TD W8091G router “bridge”

You can connect another, more modern router via a TP-Link Wi-Fi router configured in “bridge” mode. In this case, only one LAN port (any of the four) is used in the TP-Link device.

Question: setting up the W8091G router for multinex – what will it look like?

Firstly, you need a router without an ADSL module. Secondly, its options must support “802.1x MD5” (connections of this type). There are only a few routers that allow this feature without reinstalling the firmware, but they do exist.

Question: how to reset the TD W8091G router without pressing reset?

You can return the settings to factory defaults from the graphical interface. Go to the “Maintenance” -> “SysRestart” tab:

Reset tab

If you select “Factory...” here and click “Restart”, the settings will return to their default values.

Question: is it possible to remotely manage a router that is connected to the provider via ADSL?

In general, the answer is this: the router must support telnet control. And also, the administrator needs to know the IP address of the router on the Internet (for static IP - this is simple, for dynamic addresses - there must be support for a special service in the router). The TP-Link model discussed in the review fits both requirements, but supports only one service (dyndns.com).

Question: can a Wi-Fi router work and distribute the network without an Internet connection?

Yes, it can (to do this, just set up a wireless network).

@ 2023 klerdevi.ru - Computer. Programs. Windows. Computer literacy