Why the phone screen does not work - reasons and explanations. What to do if your phone falls The phone fell and broke

In this article I will talk about the reasons why the screen/display on your phone does not work, and what to do in this situation.

Let's start in order.

First steps and theory

The development of the mobile industry has taken the direction of increasing the size of the display and minimizing the number of mechanical keys. The screen is the main way you control your device, and damage to it can turn your phone into a useless pile of metal. There are many options for the screen to malfunction: from the appearance of small spots and defects to its complete inoperability.

Each breakdown is unique and requires separate consideration. You must be sure of the reason for the inoperability, otherwise dishonest service workers may profit from you. First of all, you need to make sure that everything is in order with the software part of your device. To do this you need:

1. Connect the charger to the device, let the battery charge a little
2. Turn on your device. Connect your mobile phone to your computer

If synchronization is successful, but no changes occur on the screen, the problem is in the components. Let's look at the main causes of malfunctions in the operation of the mobile phone screen and explain them.

Phone screen not working due to mechanical/physical damage

Every smartphone crash is a kind of lottery; everyone is lucky differently. One mobile phone may be left without a single scratch if dropped from a great height, while another may be damaged if it accidentally collides with a hard surface.

Mechanical damage is easily diagnosed with the naked eye. A growing crack, and often a “cobweb,” appears on the phone screen. There can be several outcomes in such a situation:

1. Damage to the protective glass and stable operation of the device
2. Image display but sensor damage
3. Complete screen failure

Replacing damaged protective glass depends on the device. Modern models are equipped with combined screens with a sensor and protective glass, which allows for minimal thickness. Replacing such components is expensive and requires replacing not only the protective glass, but also other components. The same principle applies to a damaged sensor.

If the protective glass is damaged, but the screen works, this is not a reason to continue using this device. It is recommended to urgently contact a service center, because your phone becomes vulnerable to moisture and liquid, which can cause more serious damage.

The phone did not fall, but the screen does not work. Causes of failure

Loss of functionality of a mobile phone screen can be associated not only with mechanical damage to the outer side of the display. Moisture, damage to the screen control chip, wear or disconnection of the cable, and other reasons depending on the specific model can cause the phone screen to become inoperable.

Moisture and liquid entering the phone body

Everyone knows from an early age that water has no place in electronics. If moisture or liquid gets into the phone, it can lead to the destruction of the contact board, short circuits and other critical phenomena that impair the functionality of the device.

Destruction of contacts on the board may require both routine cleaning and replacement of many components. If water gets into the device, it is recommended to immediately contact a service center for help. Water getting into the screen of a mobile phone can cause characteristic streaks and stains, which can be corrected by replacing the screen or modules.

Screen control chip failure

Failure of microcircuits in a device is not uncommon. The screen does not receive the necessary information from the device and does not display an image. It is impossible to identify this problem using standard means; it will be determined at the service center. Damage can only be corrected by replacing components.

Worn or disconnected cable

The cable connects the mobile phone screen to the device and is replaceable. This solution allows you to quickly replace the screen without interfering with the device board, but adds the possibility of detachment upon impact. Connecting the cable will not take much time and will not hurt your pocket.

Cable wear is typical for flip phones and sliders. In such devices, constant physical contact is created when opening and closing, which over time leads to a faulty state. In such cases, the cable is replaced at the service center and does not require the purchase of a screen module.

Dead pixels and spots on the screen

The worst thing that can happen to a phone after a slight fall is that the trace in the middle of the board breaks.

This breakdown can usually be repaired only by replacing the entire phone board, which, in fact, can be equated to buying a new phone. All that remains from the old phone is the body, screen, cables and speakers with microphones. But this can also be beneficial, because... For some models, the main cost of the phone is determined by the screen. But there are exceptions; some boards can be restored.

It can be very difficult to determine such a breakdown by external signs.

A less terrible thing that can happen to a phone if it falls slightly is that some kind of microcircuit breaks off, of which there are quite a few in the phone, from the processor, flash drives, power controllers, to radio switches and high-frequency microcircuits that are responsible for connecting the phone to the network.

In this case, the main difficulty is to find what exactly is missing, which microcircuit.

External signs that something is wrong with your phone...

Without a phone it’s like without hands. This statement is increasingly becoming true for modern people. A decade ago, we could only get by with landline phones. "Last century!" - many thought. But it is so, dear readers. Today, in century number 21, a person and a mobile phone are inseparable things. Let's talk about what to do if your little friend refuses to work. What to do if the phone does not turn on? So:

The phone won't turn on! SOS!

The main thing, dear readers, is not to panic. History knows a lot of cases when this or that individual simply forgot to charge the phone, which did not turn on due to the low battery charge. Therefore, before buying a new communication device, check if your phone has simply lost power and needs to be recharged.

Suppose the phone was charging for a long time, but did not turn on. Here there may be various options. The very first way to solve the problem is to remove...

Emergency help What to do if headphones were connected to the phone or it was charging? Problems that may arise after a phone gets into water Folk remedies for drying a mobile phone If the water was salty? What can't you do?

Everyone has a cell phone now, and many people have probably dropped it into water or spilled tea, juice or coffee on it. But not everyone can answer exactly what to do if the phone falls into water. And by the way, it is the first minutes after the incident that decide whether the device will receive a second life or will never turn on again.

Emergency help

Let's say right away that the amount of liquid is not particularly important. Sometimes it is enough to put the phone on a wet floor and it will stop working, and some devices work without failure even after taking a bath, but the second option is rare. What is the correct action if your phone falls into a bathtub, sink or any container of water?

Immediately remove it from...

Question about LG Optimus L4 II E440 Guest asked 06/12/2014 13:23 Add answer

What should you do if your phone falls on the floor and won’t turn on? it fell on the floor and doesn’t turn on, but it responds to the charger, and if you connect it to the computer, the screen shows that the phone is charging.

More about this phone: Answers (20) Characteristics
woolfy34 answers about LG Optimus L4 II E440 06/20/2014 04:06

Most likely you have damaged the phone's power button, or the button (pusher), or the plastic button itself - first you need to disassemble the phone - because if the problem is in the plastic button, it just needs to be put in place - after which the phone will continue to work - if the pusher needs to be resoldered - for re-soldering the pusher...

Why won't my phone turn on?

It is impossible to imagine the life of a modern person without a mobile phone. Despite the abundance of communication and communication tools, this little assistant still comes first. The phone has become like an extension of the hand, and its absence causes discomfort and uncertainty - what if someone calls or writes while the owner has lost his vigilance? Some particularly fanatical users even move around the apartment with the device - it is in the kitchen, in the bathroom, and under the pillow. One can only guess what disappointment befalls the owner if the phone turns off and does not turn on. What are the reasons for such trouble? What to do if we are talking about a brand new smartphone? There is no need to panic -

Do no harm!

Attempts to immediately disassemble the phone and check “what’s inside” can be disastrous for the fragile device. Without special knowledge, to understand the structure of microcircuits and incomprehensible parts...

The absence of any reaction from your favorite gadget can make any owner nervous. No matter how expensive a phone is, it, unfortunately, is not invulnerable and eternal. If your device stops turning on, you need to try to determine the cause and attempt to eliminate it. Problems can be hardware or software in nature.

Basic hardware problems

One of the most common reasons why any phone fails is a fall. Sometimes it is enough to simply drop the device on the floor for it to stop showing signs of life. If your favorite smartphone does not turn on after a fall, you will not be able to deal with this problem on your own without the skills to repair mobile phones. It is better to immediately contact an official or third-party repair service.

No less often, phones stop turning on after contact with water. You can try to cope with this problem on your own, but to act...

We are sure that the service center is an organization that does not only repair mobile phones. In our opinion, the service center is also obliged to be an adviser to its clients. If your phone does not turn on, then after reading this article, you will know what to do and who to contact.

For now, we will look at several problems that can serve as an obstacle to the operation of a mobile phone:

Firstly, such incidents occur quite often and this is confirmed by numerous calls to our service center. Secondly, such a surprise can happen with almost any mobile device: a Nokia or HTC, Samsung or Sony Ericsson phone does not turn on, you can be sure that this does not depend on the manufacturer. Thirdly, owners of mobile phones with whom a similar incident happened, instead of taking the device to a service center, often damage their device, worsening its condition, since they do not...

What to do if your phone falls into water.

Such a misfortune can happen to anyone, and to some it has happened more than once. Someone drops their mobile phone into the sink or toilet, someone washes it with their clothes, and someone simply spills some liquid on it.

The device does not turn on? Don’t rush to get upset, you can try to bring him back to life. We know how you can revive a drowned phone in a few simple steps. Nobody gives guarantees, but why not try?

1. Turn off your phone. This is exactly what needs to be done immediately with the device pulled out of the water. The fact is that the breakdown of the device is not due to the destructive effects of moisture, but to short circuits that appear because of it. Under no circumstances should you shake the phone, as the liquid may penetrate even deeper. If you can remove the battery from the phone, then this should be done as soon as possible. If it is not removable, then you should at least turn off the power. If at the moment it hit the device it was...

Many people don’t know what to do if their phone won’t turn on or charge. It would seem that there are no visible reasons for such a operation of a mobile gadget, but one day many mobile phone owners may encounter such a problem. And solving it is much more difficult than, for example, unlocking a ZTE phone or any other model.

Why won't my phone turn on?

The most common reasons for not turning on a mobile phone include:

1. Low battery.
2. Problems with phone contacts that do not receive charge from the battery.
3. The device's power button is broken.
4. Problems with the mobile phone screen.
5. Mechanical damage.

To turn on the phone:

1. Put your phone on charge.
2. Remove the battery and then reinsert it into the mobile phone.
3. If you have problems with the screen, then in this case you should contact the service center.
4. In case of mechanical damage, when the phone was dropped or hit...

Telephone - despite the continuously developing information system, these small means of telephone communication continue to remain at the peak of their popularity. Thousands of residents cannot imagine how their life would change, in what direction it would turn, if they did not have this small but irreplaceable assistant at their disposal, like a telephone or smartphone. Many will agree that this is not even a communication device, but an extension of the hand, whose malfunction can cause serious discomfort. Many people cannot afford to be left without a phone for a minute. What if at this very second an important message or call arrives on the device, which will radically change the course of events in the life of the phone owner. And extreme panic can begin the second the owner of the smartphone realizes that there are some problems with the device. It’s okay if the music file doesn’t open, or the pictures on your phone have become more blurry and inaccurate. But if the phone turns off, and then...

What to do if your phone falls into water? This is not such a simple question as it might seem at first glance. Especially if the phone is touch-sensitive. After all, such a situation can happen in the life of any person. No matter how confident a person is in his careful and careful attitude towards the telephone, no one is immune from an emergency.

What to do if your phone falls into water, and for what reasons could this happen?

Firstly, it can simply get wet from the rain. But that’s what cases and other accessories are made for. But they don't always save. The phone may fall into a river or lake while on vacation, or it may be accidentally forgotten in your pants and put in the washing machine. It can also be accidentally dropped into a bucket filled with water while cleaning, or simply doused with tea or juice. All this will lead to malfunctions of the device. But how to deal with this and what to do if the phone falls into the water?

A set of measures to rescue a drowned phone

If your phone falls...

There are a lot of situations when our smartphone can come into contact with water. You might get caught in a heavy downpour, knock over a cup of drink onto a nearby smartphone, or even drop your phone into the water while taking a hot bath. Recently, smartphone manufacturers have been trying to introduce water protection into their devices. However, the percentage of such devices is still very small, so our article will be relevant for a long time.

We will tell you what not to do if your smartphone gets wet, as well as several ways to correct the current situation.

1. Remove the smartphone from the water, turn it off and disassemble

As we were taught in life safety lessons, the first step is to get rid of the source of danger. In our case, we immediately take the device out of the water and turn it off. The smartphone has both slots and connectors for headphones/charging, through which water can instantly reach the insides and can cause a short circuit. After you take out the phone, you need to wipe it with a dry towel and also remove the battery. This will completely de-energize the device and reduce the likelihood of a short circuit to zero. We recommend removing the SIM card and memory card along with the battery.

IMPORTANT

Do not turn on your smartphone until you have completed all instructions.

2.Wipe all parts of the device well

After you take out the device, you need to wipe it thoroughly with a dry towel to get rid of all visible moisture. Do not use regular napkins or paper towels. It's no secret that paper napkins not only absorb moisture very well, but also quickly get wet, breaking up into small fibers. These lint will get caught in the holes and crevices of the device and will only make things worse.

Take a rag or cloth towel and wipe the device dry both outside and inside if water does get there. Do not leave a single drop on the surface, because any little thing can cause corrosion and render the device inoperable.

3. Hair dryer or vacuum cleaner?

For most people whose phone has fallen under water, the following situation occurs. They successfully complete the first two points of our article, but then they begin to search for additional solutions, what else can be done for the wet device. The most popular options are a hair dryer and a vacuum cleaner.

REMEMBER! Never use a hair dryer to dry your phone. Contrary to the idea that hot air will quickly dry out all the moisture, you need to understand: the air flow will not only drive the water even deeper, but can also melt some parts.

To speed up the drying process, you can use a vacuum cleaner. When drying, do not hold the hose too close to the smartphone; carry out the procedure for 7-10 minutes.

4. Put the phone in the sun in a box with absorbent or rice

Finally, when all the main steps are completed, you can begin the longest stage. The disassembled phone (we took out the battery, SIM card, flash drive) needs to be placed in a container with an absorbent substance. You've probably seen bags of this substance in shoe boxes.

You can purchase such a substance in the store in advance, in case of such an unforeseen situation. But, if the water ingress takes you by surprise, regular rice may be suitable as a “homemade substitute.” Place the device in the substance for a day and turn it over periodically, allowing water to drain out of all crevices. Only after the day has passed, having made sure that all the water has left the phone, can you try to start it.

If the device does not work, feel free to go to the service center.

5. What not to do

Finally, we would like to list what you absolutely cannot do if your phone falls into water.

• You cannot turn on the device right away. You can turn on the phone only after complete drying, when you have waited enough time for all the moisture to leave the device. Naturally, in a “wet” state, it is strictly forbidden to connect the device to a power source (put it on charge or connect it to a computer).
• Do not disassemble the device into parts. Most likely, you are not an expert, and by taking your smartphone apart (more than taking out the battery), you will only make things worse. The water will get even deeper, and you will break something.

All the best. Take care of yourself and your phones :)

It is impossible to imagine the life of a modern person without a mobile phone. Despite the abundance of communication and communication tools, this little assistant still comes first. The phone has become like an extension of the hand, and its absence causes discomfort and uncertainty - what if someone calls or writes while the owner has lost his vigilance? Some particularly fanatical users even move around the apartment with the device - it is in the kitchen, in the bathroom, and under the pillow. One can only guess what disappointment befalls the owner if The phone turned off and won't turn on. What are the reasons for such trouble? What to do if we are talking about a brand new smartphone? There is no need to panic -

Do no harm!

Attempts to immediately disassemble the phone and check “what’s inside” can be disastrous for the fragile device. Without special knowledge, it is pointless to understand the structure of microcircuits and incomprehensible parts - at best, these attempts will not help in any way, at worst, they will lead to serious damage, the repair of which can be very expensive, or even futile. It will be most offensive if the phone stopped turning on, for example, due to the fact that the battery is completely discharged. Before taking drastic measures, you need to try to rehabilitate a disconnected phone, but to do this you need to find out a number of reasons that could cause the device to malfunction.

Battery check

Situation one: I can't turn on the phone, although quite recently it was working properly, and the battery charge level was sufficient for at least another day. The simplest explanation is that the load on the battery is too high, especially for new modern smartphones. Their functionality is so diverse that it’s hard to call such a device a telephone – rather, a mini-computer. For example, always-on Wi-Fi or Bluetooth consumes too much energy - the phone is in constant search, trying to catch every network that appears or find a phone with active Bluetooth in order to immediately inform the owner about it. You just need to disable these options and use them only as needed (“What to do if your phone runs out of battery quickly” can be read at). A discharged battery causes phone turns on and off after a moment, or even does not respond at all to attempts to “revive” him. Eliminating the cause is simple - you just need to charge the phone, and after half an hour you can use it. Sometimes situations arise when the device has to be left on charge for almost a day, and only after that make a decision about contacting a specialist. The fact is that the battery life is usually no more than two to two and a half years, after which it should be replaced with a new one.

Charger

If The phone is dead and won't turn on After trying to charge it, you need to carefully inspect the charger - perhaps its wire is damaged or the contact is coming off. The problem may also lie in the socket of the phone itself, which could break or become unusable from too frequent use - most new phones have only one hole for all functions - charging, connecting to a computer, listening to music with headphones. How can I check this? A safe bet is to try to charge the battery using a universal frog battery. If the phone starts working normally after this, you can consider the cause eliminated and go to the store for a new charger.

Sometimes it happens that phone charging indicator blinking directly when trying to recharge it. That is, while the device is connected to the network, it continues to discharge. Experts explain this anomaly by severe overheating, as a result of which the battery does not receive energy. The second option is to use a “foreign” charger, especially if it is a low-quality device, the use of which can be detrimental to the phone. There are known cases when expensive smartphones failed after a short circuit in a cheap charger. After such experiments, it will not be possible to do without a hard reset or flashing the phone.

On/off button

Another reason that The phone blinks and does not turn on, may be a faulty on/off button. There may be several reasons for this. In the case where the phone is completely new and has hardly been used, the blame falls entirely on the shoulders of the manufacturer - most likely, this is a factory defect. There are two options for solving the problem: either the store will replace the phone with a working one, or the service center will repair the device free of charge. Old push-button phones are usually reliable and solid as a rock, but they also have problems with the buttons, and a problem with the power button will most likely result in the entire keyboard not responding. There are several explanations for this - in the case when The phone fell and won't turn on, the keyboard could move away from the impact. Very often the buttons malfunction if moisture has entered and the phone does not turn on– the influence of liquid always has a detrimental effect on any equipment. However, most often the buttons stop working due to the advanced age of the device. In any of these situations, turning to a specialist is inevitable - only he can figure out what actions need to be taken:

• Completely replace the keyboard membrane.
• Restore assembly soldering.
• Replace the keyboard controller.
• Completely clean the device and remove any trapped moisture.

Oddly enough, the most ordinary flash drive can cause the phone started to freeze. This is a memory card that is inserted into the device to increase its memory. The fact is that most often the flash card is not sold complete with the phone, and the consumer is forced to purchase it separately. It turns out that some memory cards may not be compatible with certain models of phones and smartphones. The recommendation in this case is simple - you need to buy a flash drive only in trusted stores of well-known brands. After inserting the card into the device, you can immediately check it - if phone freezes or does not see it, you can safely return the purchase. If the smartphone does not want to accept any of the proposed flash drives, most likely the problem lies with it. In this case, it is recommended to contact a service center - it is quite possible that you will have to reflash the phone, after which it will begin to function smoothly with any memory cards.

Installing updates

The situation when phone won't turn on after update, does not happen often, but it still happens sometimes, especially with new smartphones that have constant access to the Internet. The phone receives various updates, the installation of which may be unsafe for the device. Problems usually begin immediately after installing updates - the phone may turn off on its own, then turn on.

Sometimes the screen does not turn on, and if it is on, then strange inscriptions like “Windows phone” appear on it. The process of turning off/on can be continuously repeated several times, while no intervention helps stop the malfunction of the device. In this case, you can try to turn off the phone by removing the battery, then insert it back and turn it on again, and then use a reset, which differs for each model. If everything is done correctly and the failure is not very serious, the phone will reset and reboot on its own. This process may take some time, after which the device will return to its previous state and start working as before.

If the installed updates seriously damaged the phone, you will most likely have to use * - only a hard reboot can restore the system to factory settings, while all information stored on the SIM card and memory card will remain intact, but the system information will be completely cleared. Contacts, SMS and all programs installed on the phone will disappear. But in this case, you have to choose the lesser of two evils - returning the phone to working condition will cost much less than buying a new expensive device.

*In order to do this, you need to select the brand of your phone in the “Hard Reset” menu on the left and then find your model or use the site search (top menu).

Mechanical damage

Despite the convincing statements of manufacturers that their creations “do not burn in fire, do not drown in water and never break,” situations where phone won't turn on after falling, happen very often. A breakdown can happen at the most unexpected moment. For example, a smartphone placed in the back pocket of jeans is in danger - if it sits poorly, the owner can easily crush the screen. Repair in this case is inevitable. And the cases when The phone fell and won't turn on, the most common, service center specialists can tell you about this.

Very often there is no visible damage to the phone, but all attempts to turn it on are useless. You can try to rehabilitate the device by opening the cover and reinstalling the SIM card, flash drive and battery - perhaps the contact simply came off due to the impact. No effect? This means that the breakdown is more serious than it seemed at first. All that remains is to contact a technician who can restore the phone to its original condition. This may require flashing, but don’t be afraid - the device will function no worse, or even better, than before.

If the phone falls into water, it usually doesn't even turn on. But it also happens that the sensor simply does not work, and the iOS or Android system boots in normal mode.

After pressing the power button, a logo appears on the display, the operating system loads, but the gadget cannot be used. In this case, you can try to restore the phone after water, but first it is recommended to read the universal instructions.

To resuscitate a drowned person, you should resort to simple methods to restore the functionality of the sensor:

• Place the device in a dry place and wait for the moisture to dry.
• Place the wet phone in a bowl of rice: this will evaporate the moisture much faster, as the rice absorbs the smallest particles of water.
• If you don’t want to experiment, take the device in for repair.

In any case, you will have to disassemble the device: water gets into the most hidden places, and does not evaporate from there on its own, and over time, oxide forms in this place. It is more difficult to remove, and for this you will have to buy a special product.

Touchscreen phones are more difficult to repair than push-button phones, and their parts are most susceptible to mechanical damage, which must be taken into account during the repair process.

Drying instructions

1. Remove the battery and place it aside. If it has already oxidized, you will have to buy a new one, because the old one cannot be restored.
2. Take out the SIM card and memory card, disconnect the accessories.
3. Remove all panels and gently shake the gadget, trying to shake out any accumulated water.
4. Take a paper napkin and wipe the device as gently as possible.
5. Leave the phone in the napkins for a while, preferably two days, so that the moisture completely evaporates.
6. After two days, you can try to turn on the device. If this fails, you should take it to service.

There is an opinion that you can dry a wet smartphone using a hairdryer or microwave, but such methods usually lead to dire consequences and it stops working completely. Especially if you put microelectronics in the microwave, you will never see your smartphone again.

Elimination of oxidation

After warm water gets on the boards and cables, there is a high probability that the contacts will begin to quickly oxidize. This will lead to the appearance of “artifacts” on the device’s monitor; they may look different:

1. White or yellow spots
2. Vertical or horizontal stripes
3. Individual glowing pixels
4. Partial loss of sensor sensitivity (for example, in the corners it reacts to a finger, but not in the center)

If some parts of the phone have already oxidized, you can clean them like this:

1. Take a toothbrush and soak it in alcohol.
2. Carefully clean them of plaque.

This option can harm the parts, so it’s better not to save money, but to buy a special aerosol cleaner for cleaning oxidation and removing water from electronic boards.

Sensor repair

If after drying the device the sensor still does not work, it is better to take the gadget to a professional service.

If you wish, you can try to change the part yourself, following the instructions:

1. We clear the workspace, place a small box on the table, where various bolts will subsequently be placed.
2. Remove the front and back panels, unscrew the bolts in the battery compartment.
3. We unscrew the two screws located at the top of the device, turn off the screen connector, disconnecting the cable from the microcircuits.
4. Separate the board from the screen. Using an eraser, clean the contacts of the cable until shiny.
5. We check the connection between the sensor and the cable by placing an eraser between them. If there is contact, then the problem is not with him.
6. We remove the old module and install the new one.
7. We carry out all the steps in reverse order, excluding step 5.

Replacing a sensor is a complex procedure that requires not only skills, but also time, since everything can take several hours. If the problem is not solved, it is better not to aggravate it and take the device to a specialist.

Under no circumstances should the device be placed in an oven or microwave: this may cause equipment failure or even a fire in the house. It is not recommended to place the device directly on the battery, so as not to cause the inoperability of all parts.

It is advisable to use gentler methods: for example, put it in rice (it quickly absorbs moisture) or next to the battery so that the water dries on its own.

How to dry a sunken smartphone in rice:

1. We take the device out of the water and remove the cover as quickly as possible.
2. Pour 1-2 cups of rice into a bowl and remove the battery from the gadget.
3. Add another portion of rice.
4. We leave the phone to dry for two days.
5. We assemble the device and try to turn it on.

After a good drying, after a couple of days, but not earlier, it is worth trying to connect the charger and observe the behavior of the “drowned man”. In 10% of cases, iOS or Android starts loading as if nothing had happened and the touchscreen restores functionality.

Conclusion

Don’t despair if your phone falls into water and as a result the sensor stops working: there are several proven methods that will definitely help restore the device’s functionality. To do this, just be patient and try to revive the smartphone yourself, choosing the most suitable method for drying the parts.

In the future, be more careful and do not drop the device in liquid; in 90% of cases, irreversible death of the device occurs.

Video